SMPP Kannel v.1.4.3 Issue

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

SMPP Kannel v.1.4.3 Issue

Dave
Hi all,

does anyone knows this behaviour?

The SMPP link is online for many days and after a reconnect (from the
provider?) the link shows it is online but no messages are going through
it. They are re-routed by Kannel internally through a different link.

We experience this with two independent SMPP providers. However, it does
not happen on every automatic reconnect. Could it be a configuration
issue?

group = smsc
smsc = smpp
smsc-id = <name1>
allowed-smsc-id = >name1>;<name2>
preferred-smsc-id = <name1>
host = <ip>
port = 2775
receive-port = 2775
smsc-username = <user>
smsc-password = <pass>
system-type = "DIR"
throughput = 10
dest-addr-ton = 2
dest-addr-npi = 1
bind-addr-ton = 1
bind-addr-npi = 1


group = smsc
smsc = smpp
smsc-id = <name2>
allowed-smsc-id = <name2>;<name1>
preferred-smsc-id = <name2>
host = <ip>
port = 2775
receive-port = 2775
smsc-username = <user>
smsc-password = <pass>
system-type = "CMT"
throughput = 10


Thanks for input, David.

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: SMPP Kannel v.1.4.3 Issue

Donald Jackson-6
Split your single bind into two separate binds (one with port only and one with receive-port only) this will solve your problem.

On 3 July 2017 at 14:43, Dave <[hidden email]> wrote:
Hi all,

does anyone knows this behaviour?

The SMPP link is online for many days and after a reconnect (from the provider?) the link shows it is online but no messages are going through it. They are re-routed by Kannel internally through a different link.

We experience this with two independent SMPP providers. However, it does not happen on every automatic reconnect. Could it be a configuration issue?

group = smsc
smsc = smpp
smsc-id = <name1>
allowed-smsc-id = >name1>;<name2>
preferred-smsc-id = <name1>
host = <ip>
port = 2775
receive-port = 2775
smsc-username = <user>
smsc-password = <pass>
system-type = "DIR"
throughput = 10
dest-addr-ton = 2
dest-addr-npi = 1
bind-addr-ton = 1
bind-addr-npi = 1


group = smsc
smsc = smpp
smsc-id = <name2>
allowed-smsc-id = <name2>;<name1>
preferred-smsc-id = <name2>
host = <ip>
port = 2775
receive-port = 2775
smsc-username = <user>
smsc-password = <pass>
system-type = "CMT"
throughput = 10


Thanks for input, David.




--
Donald Jackson
http://www.ddj.co.za
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: SMPP Kannel v.1.4.3 Issue

Dave
Thank you, Donald.

However, I cannot follow your solution properly. Would you have a
practical example? I am a bit confused with these port settings.

Thanks! David.

On 03.07.2017 15:03, Donald Jackson wrote:

> Split your single bind into two separate binds (one with port only and
> one with receive-port only) this will solve your problem.
>
> On 3 July 2017 at 14:43, Dave <[hidden email]> wrote:
>
>> Hi all,
>>
>> does anyone knows this behaviour?
>>
>> The SMPP link is online for many days and after a reconnect (from
>> the provider?) the link shows it is online but no messages are going
>> through it. They are re-routed by Kannel internally through a
>> different link.
>>
>> We experience this with two independent SMPP providers. However, it
>> does not happen on every automatic reconnect. Could it be a
>> configuration issue?
>>
>> group = smsc
>> smsc = smpp
>> smsc-id = <name1>
>> allowed-smsc-id = >name1>;<name2>
>> preferred-smsc-id = <name1>
>> host = <ip>
>> port = 2775
>> receive-port = 2775
>> smsc-username = <user>
>> smsc-password = <pass>
>> system-type = "DIR"
>> throughput = 10
>> dest-addr-ton = 2
>> dest-addr-npi = 1
>> bind-addr-ton = 1
>> bind-addr-npi = 1
>>
>> group = smsc
>> smsc = smpp
>> smsc-id = <name2>
>> allowed-smsc-id = <name2>;<name1>
>> preferred-smsc-id = <name2>
>> host = <ip>
>> port = 2775
>> receive-port = 2775
>> smsc-username = <user>
>> smsc-password = <pass>
>> system-type = "CMT"
>> throughput = 10
>>
>> Thanks for input, David.
>
> --
>
> Donald Jackson
> http://www.ddj.co.za [1]
>
>
> Links:
> ------
> [1] http://www.ddj.co.za/

Loading...