I think you should try using below parameter by setting value as "no"
Optional, if defined tries to scan the source address and set TON and NPI settings accordingly. If you don't want to autodetect the source address, turn this off, by setting it to no. (Defaults to yes).
On Fri, Jun 23, 2017 at 4:56 PM, Artem Chekulaev <[hidden email]> wrote:
Tried to set in config
source-addr-ton = 1
source-addr-npi = 1
dest-addr-ton = 1
dest-addr-npi = 1
Checked dump, get
TON (orig) = 0x05 Alphanumeric
NPI (orig) = 0x00 Unknown
Query send from *1234 to 99912345678 (changed). Operator needs me to send from num with *
How to set TON / NPI?
The content of this message may be legally privileged and confidential and are for the use of the intended recipient(s) only. It should not be read, copied and used by anyone other than the intended recipient(s). If you have received this message in error, please immediately notify the sender, preserve its confidentiality and delete it. Before opening any attachments please check them for viruses and defects. No employee or agent is authorised to conclude any binding agreement on behalf of Sterlite Technologies Limited with another party by email without express written confirmation by authorised person. Visit us at www.sterlitetech.com
Please consider environment before printing this email !